WE CAN HANDLE ALL OF YOUR
MACHINING & MANUFACTURING NEEDS

Manufacturing Excellence for More than 30 Years

ABOUT BONIFACE TOOL & DIE

In 1957, Boniface Tool & Die began in the family garage. Today, Boniface Tool & Die operates state-of-the-art equipment, including two newly acquired tape milling machines. From a nearly 70,000 square foot facility in Dudley, Massachusetts, Boniface provides its customers worldwide with precision machined tools and components. While our equipment has changed and our company home has grown, our commitment to quality and customer satisfaction has remained the same.

Whether you require aircraft engine ground support tools and equipment, or machined parts for aerospace, naval, land based, or manufacturing industries, Boniface Tool & Die is your source for quality precision machined components. We have the ability to work on materials from plastics and nylon to alloy and super alloy metals.

Boniface Tool & Die has an ongoing commitment to improvement and a proven track record which speaks for itself. For over forty years, Boniface has stood the test of time. The service and capability which we offer in tool making and precision machining is deeply rooted in our history, longevity, and commitment to the future. We believe this combination will propel Boniface well into the next century and we look forward to sharing in business success with our customers.

AIRCRAFT ENGINE GROUND SUPPORT EQUIPMENT

Tools
Fixtures
Test Equipment

PRECISION MACHINING

Lathe
Milling

CUSTOM MANUFACTURING

Special Tooling
Complete Assemblies

OUR COMMITMENT

At Boniface Tool & Die, quality assurance and customer satisfaction go hand in hand. Whether in planning, production, or final inspection, it is our goal to meet the needs of our customers. Using the latest technology and a wealth of experience, we provide inspection services to meet military standards and civilian order requirements.

Job Planning

Quality production begins in the earliest stages. At Boniface Tool & Die we make certain that all our jobs get the attention they require to ensure quality parts from the planning stage.

Job Planning

Materials

Utilizing Certified raw materials, we are able to meet our customers quality standards and documentation needs.

Materials

Quality in Production

Careful planning and accurate process controls allow Boniface to ensure top quality during production. In process inspection of work is an integral part of meeting our customers’ expectations.

Our gage control systems require all of our tool makers and machine operators personal tools be fully calibrated with traceable records, just as we require for our shops gages and instruments.

Quality in Production

Final Inspection

At Boniface Tool & Die we pride ourselves in the work of our inspection department and focus a great deal of effort on this area of our business. Adhering to MIL-I-45208A and MIL-STD-45662, we follow our quality control policy and procedures in order to ensure that we meet our customers' requirements and expectations of quality. We are constantly improving our inspection facilities and equipment to utilize the best technology for our customers' benefit.

Final Inspection

Ground Support Equipment is Our Specialty!

PRODUCTS & SERVICES

For over forty years, Boniface Tool & Die has manufactured tools for the aircraft industry. We maintain a large inventory of Ground Support Equipment tooling for many General Electric Aircraft Engine requirements. We are a licensed manufacturer and supplier for CFE Company’s 738 Engine Program.

There is no substitute for the expertise which is gained through the commitment of time to the craft of tool making. Boniface Tool & Die has made that commitment. Boniface Tool & Die manufactures custom components for numerous applications including air, land, and naval requirements for civilian, military, and international customers.

At Boniface Tool & Die, we pride ourselves in our capacity to provide top quality precision work on short run production of many various parts and components. We have extensive capability thanks to our CNC equipment which allows us to serve the needs of a wide variety of industrial requirements. Our recent acquisition of two new tape milling machines will enable us to offer even greater service in this area.

We offer complete custom manufacturing services from your prints including complete assemblies. We have established relationships with the finest subcontractors for services of plating, material heat treating, finishing, painting and more. Boniface is a singular solution to your custom requirements.

FACILITIES

POWER STATION 2000
MASTERCAM

1 - Johansson Cordimet 801 Coordinate Measuring Machine, Fully Automatic C/N/C or Manual Operation, Measuring Range 31.5" X & Y, Height 21.5", Resolution .00005
2 - Brown & Sharpe Electronic Micro Hite, 24" Capacity
1 - Set 102 Gage Block Masters
8 - Rahn Surface Plates, 18" x 24"
5 - Rahn Surface Plates, 12" x 18"
5 - Rahn Surface Plates, 36" x 38"
1 - Jones & Jampson 14" Comparator
3 - Sets Gage Blocks
1 - Brown & Sharpe Hite-Icator, 18"
1 - Brown & Sharpe Hite-lcator, 12"
3 - Mitutoyo Cadillac Gages, 12"

1 - Hitachi Seiki C/N/C Machining Center VA-55 15 HP, 41.5" x 21.5" Overall Table Distance, Max Height 21.5", Max. Workload 22,000 lbs., Capacity 30 Tool Change
1 - Mazak V12-12 HP C/N/C Machining Center, 55" x 26" Overall Table Distance, Max. Height 27", 2200 lb. Workload, 20 Tool Change Capacity
1 - HURCO VM20 20” x 40” x 20”
2 - MATSUURA MC-500 20” x 15” x 15”
1 - YAMA SEIKI BM1600 50” x 30” x 30”
1 - YAMA SEIKI BM2100 80” x 40” x 40”
1 - HAAS CNC MILLING CENTER VF11 120” x 80” x 40”
1 - Miyano C/N/C TSV-35 Production Drilling & Tapping Machine 12" x 16" 12 Tool Change

1 - 1 HP Bridgeport Milling Machines (with power feeds and digital readouts)
1 - Heavy Seiki Vertical (with peg-board control) 10 HP
1 - Hitachi Seiki#3 Horizontal 10 HP
3 - Proto-Trak MX2's
3 - Proto-Trak AGE 2's
2 - EZ TRAK

1 - HAAS SL30 12” x 28”
1 - PROTO TRAK Lathe 24” x 60”
1 - PROTO TRAK Lathe 18” x 45”
1 - Mori Seiki C/N/C Model SL-3M, 20 HP, 40-4000 RPM, 12 Station, 10" Chucking Capacity, 24" Between Centers, with 3.10 Max. Dia. Bar Feed Capacity
1 - Taiyo Seiki in C/N/C Lathe, 11/8 Bar Feed Capacity, 4.50" OD x 81/2 Long Chucking Capacity
1 - Hitach-Seiki C/N/C Model 255, 25 HP, 20-3600 RPM, 10 Station,
17" Max. Swing, 24" Between Centers, with 21/2" Bar Feed Capacity

1 Kingston Lathe 22” x 60”
1 Kingston Lathe 26” x 60”
1 - Okuma Lathe with metric conversion, 23" x 55"
1 - Royal Lathe with metric conversion, 18" x 34"
1 - South Bend Lathe, 14" x 34"
1 - South Bend Lathe with all attachments, 9"
1 - Mori Seiki Lathe, 16" x 36"
1 - Toss Trencin 34" x 60"

2 - Acuratool Automatic Turret Lathes up to 4000 RPM, 1" Capacity with Bar Feed

1 - Hardinge Six Station Turret, 1-1/16" Capacity, up to 18", 3500 RPM

2 - Okamoto, 12" x 24", Accugar-124N
3 - Boyer Schultz, 6" x 24"
1- Brown & Sharpe, 6" x 12"

1 - DAREX XT-3000 Drill Sharpener
1 - OMAX 2652 Water Jet 26” x 52”
1 - Kalamazoo Cutoff Machine
1 - Sunnen Precision Honer
Various Rotary Tables, Super Spacers, etc.
1 - Aminco Oven 650° Max.

1 - Allen Drill Press, 6 Spindle, 15"
1 - Heavy Duty Allen Drill Press
1 - Heavy Duty Production Milling Machine
Various Other Single Spindle Drill Presses
2 - Buffalo 15 Drill Presses

1 - Do-All Automatic Hydraulic Production Cutoff Machine
2 - Abrasive Cutoffs
1 - Do-All Band Saw Model DBW-12B
1 - Do-All Band Saw, 18" Throat

1 - 1307 Jones and Shipmen Eit Cylindrical, 14" x 40"

1 - 75 Ton Hand Hydraulic Press

1 - Branson Ultrasonic Cleaning Tank

2 - K.O. Lee Grinders

Boniface Tool & Die

We operate state-of-the-art equipment, including two newly acquired tape milling machines. From a nearly 100,000 square foot facility in Southbridge, MA, Boniface provides its customers worldwide with precision machined tools and components.

CONTACT US

Boniface Tool & Die, Inc.
181 Southbridge Road
Dudley, MA 01571
USA

Phone: 508-764-3248
Fax: 508-764-8322
Email: info@bonifacetool.com

Please do not hesitate to contact us with any questions you may have. We’re here to serve you!

TOP